â– 1GE+WIFI is designed as HGU (Home Gateway Unit) in deferent FTTH solutions; the carrier-class FTTH application provides data service access.
â– 1GE+WIFI is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
â– 1GE+WIFI adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.
â– 1GE+WIFI is compliant with IEEE802.11n STD, adopts with 2x2 MIMO, the highest rate up to 300Mbps.
â– XPON 1GE+WIFI are fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
Â
Technical Item |
Details |
Model |
H102 |
Feature |
Supports Dual Mode (can access GPON/EPON OLT). |
Supports GPON G.984/G.988 standards |
|
Support 802.11n WIFI (2x2 MIMO) function |
|
Support NAT, Firewall function. |
|
Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect |
|
Support port mode of VLAN configuration |
|
Support LAN IP and DHCP Server configuration |
|
Support TR069 Remote Configuration and WEB Management |
|
Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode |
|
Support IPv4/IPv6 dual stack |
|
Support IGMP transparent/snooping/proxy |
|
In compliant with IEEE802.3ah standard |
|
Compatible with popular OLT (HW, ZTE, FiberHome...) |
|
PON interface |
1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/UPC connector Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
LAN interface |
1x10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
WIFI Interface |
Compliant with IEEE802.11b/g/n Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps 2T2R,2 external antenna 5dBi Support: Multiple SSID Channel:13 Modulation type: DSSSã€CCK and OFDM Encoding scheme: BPSKã€QPSKã€16QAM and 64QAM |
LED |
7 LED, For Status of POWER, LOS, PON, LAN1~LAN2, WIFI, WPS |
Push-Button |
4, for Function of Power on/off, Reset, WPS, WIFI |
Operating condition |
Temperature : 0℃~+50℃ Humidity :10%~90%(non-condensing) |
Power supply |
DC 12V/1A |
Net Weight |
<0.4kg |
Power Consumption |
<6W |
Â
Pilot Lamp |
Status |
Description |
WIFI |
On |
The WIFI interface is up. |
Blink |
The WIFI interface is sending or/and receiving data (ACT). |
|
Off |
The WIFI interface is down. |
|
WPS |
Blink |
The WIFI interface is securely establishing a connection. |
Off |
The WIFI interface does not establish a secure connection. |
|
PWR |
On |
The device is powered up. |
Off |
The device is powered down. |
|
LOS |
Blink |
The device doses not receive optical signals or with low signals. |
Off |
The device has received optical signal. |
|
PON |
On |
The device has registered to the PON system. |
Blink |
The device is registering the PON system. |
|
Off |
The device registration is incorrect. |
|
LAN |
On |
Port is connected properly (LINK). |
Blink |
Port is sending or/and receiving data (ACT). |
|
Off |
Port connection exception or not connected. |
http://www.fiberidea.com/